Cyclone  Series 2 Scanning Machine
RL Stephens Tool, 2003. All Rights Reserved.
Site Designed and Maintained by:
SPOON FROG graphics
MACHINE TOOL PROBES
Scanning & Digitizing Systems - Cyclone Series 2 Scanning Machine
1717 North Raymond Avenue Anaheim, California 92801
Toll Free: 1 - 800 - 826 - 5133
Local Phone: 714 - 879 - 6637 Fax: 714 - 879 - 0911
Home > Online Store > Renishaw > Scanning & Digitizing Systems > CYCLONE SERIES 2 SCANNING MACHINE
The Cyclone series 2 scanning machine is a high-speed
scanning machine which provides the mold and die makers with
a quick, reliable method of transforming pattern into part
program.
Axis travel:
Max. workplace weight:
Height:
Width:
Depth:
Accuracy:
Resolution:
Scanning speed:
Rapid speed:
Scanning rate:
Probe:
Standard stylus:
Crash protection:
Software:
Part program output:
I
Weight:
Color:
Table:
I
Operating temp. range:
Relative humidity stor.
Temperature range:
Power supply:
Power consumption:
Air pressure:
Air consumption:
600 x 500 x 400 mm (23.6 x 19.7 x 15.7 in)
200 kg (440 lbs)
1785 mm ( 70.28 in)
965 mm ( 38 in)
1260 mm ( 49.61 in)
50 m (0.002 in) *
5 m (0.0002 in)
up to 3 m/min (118 in/min)
7 m/min (275 in/min)
up to 140 pts/sec
Renishaw's SP620 3-axis analog scan probe
6 mm (0.27 in) x 100 mm (4 in) ceramic
Via detachable magnetic stylus holder
Renishaw's traceout CAM software
Available for most CNCs (ASCII, DXF and VDA
output also available)
125 kg (275 lb)
Royallite Grey
Granite tile with MB bolt hole inserts and
clamp kit
10 C to 38 C (50 F to 100 F)
I
10 C to 50 C (14 F to 122 F) 20% to 80%
240/110 V AC 50/60 Hz (auto select)
200 W
5 bar (80 psi) **
40 I/mm (1.4 cf/min)
Note: A computer is not included in the kit.
Includes:
Cyclone scanning machine
Traceout CAM software
SP620 3-axis analog scanning probe with 100 mm stylus
Air filtration system
Magnetic breakaway protection for stylus
Datum sphere
Fiber optic communication card
Power supply
Stylus kit A - 5000 - 7677
Installation
On-site training
Part number: CYLONE KIT
Specifications
* Cylcone will generate a 1:1 NC part program from a 50 mm (1.97 in) sphere in which the commanded tool path
will be within 50 m (0.002 in) of the shpere's actual shape.

** The use of an air dryer is recommended.