LP2
RL Stephens Tool, 2003. All Rights Reserved.
Site Designed and Maintained by:
SPOON FROG graphics
MACHINE TOOL PROBES
Tool Setting Probes for Machining Centers - LP2
1717 North Raymond Avenue Anaheim, California 92801
Toll Free: 1 - 800 - 826 - 5133
Local Phone: 714 - 879 - 6637 Fax: 714 - 879 - 0911
Includes:
LP2 probe
2 C spanners
TK1 tool kit

Part number: A - 2063 - 6098
The LP2 probe is used on CNC lathes for workpiece inspection
and tool setting. It is also used in special applications where
its small body makes it suitable for gauging workpiece features
with restricted access.

The LP2 is universal and can be fitted to optical, inductive, hard-
wired and radio transmission systems. An array of sockets
and adaptors are available to support these applications.
Sense directions
Stylus overtravel
Stylus trigger force
(factory set using 50 mm stylus)
+ and - X, + and - Y. + Z
X and Y: + and - 12.5 degrees
Z: 6.5 mm (0.25 in)
Z: direction: 585g
X and Y: 50 - 90 gf
Undirectional repeatablility
0.00004 in