PH10T Probe Head
RL Stephens Tool, 2003. All Rights Reserved.
Site Designed and Maintained by:
SPOON FROG graphics
COORDINATES MEASURING MACHINE PROBES
Motorized probes heads - PH10T
The new PH10T motorized probe head allows complete, rapid,
and repeatable inspection of most complex components with
minimum human intervention. Full orientation of your TP2, TP6,
or TP200 probe between any of the 720 positions, under manual
or program control, turns your 3 axis CMM into a 5 axis
machine.
Positional repeatability:
Cycle time (90 deg. move):
Total angular movement:
I
Total number of positions:
Max. extension bar length:
Head mounting:
Probe mounting facility:
Probe head control:
Dimensions:
Weight:
0.00002 in
3.5 seconds
A axis 105 to 0 degrees in 7.5 deg. steps= 15 positions
B axis +,- 180 degree in 7.5 steps= 48 positions
720
300 mm using PEL4 extension
Shank to suit your CMM
M8 thread
PHC10-2 (purchased separately)
Length: 117 mm, width: 62 mm
645 g
Part Number: A - 1025 - 1520
1717 North Raymond Avenue Anaheim, California 92801
Toll Free: 1 - 800 - 826 - 5133
Local Phone: 714 - 879 - 6637 Fax: 714 - 879 - 0911